Wire stitching machine VDHa


From round, flat or band wire run off a spool, the machine automatically forms staples with a fixed back of 14 mm, while the leg length can be adjusted as desired from 7 to 26 mm. The staples are driven into the material in the same operation, and the protuding staple points are bent over flat or, in the case of corrugated cardboard, are curled in. The machine is equipped with a stapling arm. The overhang can be 500, 1000 or 1500 mm. The machine is adapted for one gauge of wire. The gauge of wire can be exchanged easily any time.



VDHa with 1000mm overhang
Technical Specifications
Stitching Direction vertical and horizontal
Material corrugated cardboard up to 15mm
Staple width 14mm
Leg length von 7 - 24mm adjustable
Stitching Wire Flat V/21, 2.6x0.45mm, 2.6x0.60mm
Round No. 19, 20, 21, 23
Stitches per minute 250
Overhang 500mm, 1000mm or 1500mm
Height 135cm
Width 45cm
Depth 80, 130, 180cm
Weight 210kg, 255kg, 305kg




No responsibility can be accepted for the correctness of this information.

Spare Parts
A compilation of the most important spare parts you can find here.

Reconditioned
We also offer recon- ditioned wire stitching machines.

Manual
An operating manual for the VDHa you can find here.

Stitching Wire
For a reliable work of all wire stitching machines please use Speckboetel Stitching Wire.

Bending
With the VDHa the staple is curled-in.